Management

Olga Đurić Perić
Structural Engineer

Olga obtained her MSc in Structural Engineering from the University of Belgrade, Faculty of Civil Engineering.

There, she worked as a Lecturer until 1989 after which she worked for Arup in Harare, Zimbabwe and in Belgrade, Serbia. Her experience extends from structural steel design to supervision and project management in Zimbabwe, South Africa, Serbia, Italy, Great Britain and Montenegro. She joined Asmec in 2012.

Vladimir Perić
Structural Engineer

Vladimir is qualified with an honors degree in Structural Engineering, which he obtained in 1976 at the University of Belgrade - Faculty of Civil Engineering.

He is a member of the Serbian Chamber of Engineers, of the Yugoslav Association of Structural Engineers, a member of the Yugoslav Association for Mechanics, a member of the Zimbabwe Institution of Engineers, a member of the Botswana Institution of Development Professions. Presently, he is a Director of Asmec consultants and a registered structural engineer in the City of Belgrade, Harare and Bulawayo. He has worked thirty-seven years as a professional structural engineer responsible for structural design, supervision and project management for various projects in different countries: Serbia, Zimbabwe, Botswana, Nigeria, Mozambique, Zambia, Senegal, Morocco, Kenya, Yugoslavia, Iraq, Libya, Kuwait, Russia, UAE and Iceland.

Structural

Milena Perić
Structural and Environmental Engineer

Milena graduated with a Masters first class honours degree in Civil and Environmental Engineering in 2006 at Imperial College London.

She also completed her PhD at Imperial College London in 2012. She joined Asmec in 2009. She has worked on the structural design of reinforced concrete and steel structures using Revit, ETABS, Safe, Tower, Armcad. She is also part of the Arup team involved in the environmental supervision of Corridor X, Serbia.

Vesna Vicovac
Structural Engineer

Vesna graduated in 2005 from the University of Belgrade, Faculty of Civil Engineering. She is a chartered member of the Serbian Chamber of Engineers.

Vesna has gained working experience in different technical, cultural, and climatic environments as she was involved in projects located in Serbia, Italy, UAE, Saudi Arabia, Turkey, Turkmenistan, Panama, Brazil, Nigeria, Great Britain, Russia, and Montenegro.Other than for the structural design, she was also responsible for design management and project coordination at all stages. She joined Asmec in 2012 and since 2018 she has been leading the structural team.

Nikola Božović
Structural Engineer

Nikola graduated in 2013 from the University of Belgrade, Faculty of Civil Engineering.

He proved to be a successful structural engineer, design manager, team leader and third-party checker of numerous projects such as residential, commercial, industrial, and educational objects, as well as hotels, bridges, hospitals, transmission towers.Nikola has gained experience, working on various projects located in Serbia, Montenegro, UAE, Nigeria, Great Britain, DR Congo, Sweden, Russia, Malesia, Myanmar, Brazil.

Jovana Ivanović
Structural Engineer

Jovana Ivanović graduated in 2016 from the University of Belgrade, Faculty of Civil Engineering.

She joined Asmec in 2016. Jovana is currently a PhD student at the Department for metal structures. She has experience in reinforced concrete, steel and composite structures gained while working on residential, commercial, industrial and educational objects.Since many projects were located outside the country, Jovana reached enviable level in using and implementing different standards such as SRPS, EUROCODE, BS, DIN, ACI, AISC, ASCE.

Bojana Knežević
Structural Engineer

Bojana graduated in 2016 from the University of Belgrade, Faculty of Civil Engineering.

Since she started working at Asmec Consultants at the end of 2016, she has been in charge of the design and coordination of the reinforced-concrete structures and complexes (hotels, residential and business buildings) located both in the country and abroad. Bojana is an ambitious Structural engineer with experience in the design and analysis of concrete, steel and composite structures using various design codes and software.

Jelena Krunić
Structural Engineer

Jelena graduated in 2019 with Masters degree in Civil Engineering from the University of Belgrade.

She joined Asmecin 2018 where she is working ondesign and analysis of reinforced concrete and steel structures using various design codes. Jelena has experience in using softwares such as Radimpex Tower, Radimpex ArmCAD, Revit, AutoCAD, MathCAD for structural design and analysis.

Adam Ramoul
Structural Engineer

Adam obtained his Master's degree in Civil Engineering in 2020 at University of Belgrade.

He is anambitious Structural engineer with experience in design and analysis of concrete, steel and composite structures, such as residential and commercial buildings, hotels, bridges and industrial buildings while using various design codes and softwares. Adam is committed to team work and effective problem solving. Besides his structural design experience, he was engaged in scientific research on structural vibrations of pedestrian bridges with one paper published in journal for research of materials and structures with high scientific and professional reputation.

Filip Todorović
Structural Engineer

Filip graduated in 2016 at the University of Belgrade, Faculty of Civil Engineering, Structural Department, with a title of Master of Civil Engineering.

Since 2016, he was working as a Structural design Engineer at the field of high raise buildings. He has experience working with numerous calculation and drafting software programs such as Revit, AutoCAD, ArmCAD, MathCAD, Idea Statica, Tower and CSI Etabs.

Aleksa Gajić
Structural Engineer

Aleksa graduated in 2017 from the University of Belgrade, Faculty of Civil Engineering and received master’s degree on the same faculty in 2020.

His work experience in structural design began in 2018 and he joined ASMEC in 2021. He would describe himself as dedicated, creative and always openfor improvement.

Marijana Nestorović
Structural Engineer

Marijana graduated in 2019 with master’s degree in Civil Engineering from the University of Belgrade.

At the end of 2021, she started working at Asmec Consultants d.o.o. She has worked on the design of reinforced-concrete and steel structures, such as residential and commercial buildings, hotels and industrial buildings.Marijanais an ambitious structural engineer with experience in using various design codes and software.

Ivana Tamara Drobnjak
Structural Engineer

Tamara graduated in 2017 from school of Applied Studies Civil Engineering and Geodesy, in Belgrade.

Although very young, she worked for the multiple foreign markets, and has a vast and rich working experience. She also has an extensive experience in AutoCAD, ArmCAD and Revit software. She became a part of the Asmec team in 2022.

Verica Jugović
Structural Engineer

Verica obtained her master’s degree in Civil Engineering in 2020 at the University of Belgrade.

She is a structural engineer who has always taken interest in and participated in ambitious engineering projects and team activities both during her studies and during her professional career.

Her Master’s thesis was published at XI International Conference on Structural Dynamics. She worked on industrial projects in both Serbia and the Middle East region, where she gained skills in working under pressure on short deadlines and with high technical requirements.
She joined Asmec in October 2022 where she is working on the design and analysis of reinforced and steel structures using various design codes.
Verica is experienced in using software such as Robot Structural Analysis, Radimpex Tower, SAP2000, and Revit for structural design and analysis.

Valentino Salonja
Structural Engineer

Valentino graduated in 2018 with a master’s degree in Civil Engineering from the University of Novi Sad.

Since 2017, he has gained work experience in the design of concrete and steel structures, such as industrial and commercial buildings. His greatest engineering achievements so far are two stadiums.

Valentino has experience working with various design codes and software. He joined ASMEC in the beginning of 2023 as a Structural Engineer.

Mechanical

Mirko Minović
Mechanical Engineer

Mirko graduated in 2003 from the University of Belgrade, Faculty of Mechanical Engineering.

He is a member of the Serbian Chamber of Engineers. He is experienced in wide range of HVAC design from early concept stages throughout the construction documentation, review of project documentation, and supervision of constructions on site. He has 18 years long experience on Serbian market, and 15 years of experience on several markets such as Russian, Kazakhstan, UAE and Montenegro. He joined Asmec in 2015.

Marko Pejin
Mechanical Engineer

Marko graduated in 2003 from the University of Belgrade, Faculty of Mechanical Engineering department of Processing Engineering.

He is a member of the Serbian Chamber of Engineers. He is experienced in wide range of HVAC design from early concept stages throughout the construction documentation, review of project documentation, supervision on site and HVAC calculation programming. He has long experience on Serbian and Russian market, and on several markets such as Ukraine, Qatar and Montenegro. Besides design, Marko is also skilled in computer programming in VBA for Excel and in AutoLISP for AutoCAD. He joined Asmec in 2018.

Jelena Topić Tasić
Mechanical Engineer

Jelena graduated in 2005 from the University of Belgrade, Faculty of Mechanical Engineering.

She is a member of the Serbian Chamber of Engineers. She is experienced in wide range of HVAC design from early concept stages throughout the construction documentation, review of project documentation, and supervision of constructions on site. She has extensive experience in Serbia, Ghana and Kazakhstan.

Jovana Kostić
Mechanical Engineer

Jovana graduated in 2013 from the University of Belgrade, Faculty of Mechanical Engineering.

She has experience in working in AutoCAD and Revit. She joined Asmec in 2015.

Biljana Lučić
Mechanical Engineer

Biljana graduated in 2018 from the University of Belgrade, Faculty of Mechanical Engineering.

Her department is thermal engineering, focused on design of heating and cooling equipment. From 2021 she is a member of the Serbian Chamber of Engineers. She has experience in working in AutoCAD, heating specialist softwares and Revit. She joined Asmec at the beginning of 2018.

Milan Tadić
Mechanical Engineer

Milan graduated in 2019 from the University of Belgrade, Faculty of Mechanical Engineering, department of Thermal Science Engineering.

Since joining ASMEC, in late 2019, he has participated in several projects, concerning HVAC systems design. He has experience in working with various HVAC systems design software.

Igor Planjanin
Mechanical Engineer

Igor obtained his MSc in Mechanical Engineering from the University of Belgrade, Faculty of Mechanical Engineering in 2021.

He joined Asmec in 2021 and has engaged in the design of heating and cooling equipment.He is very passionate about fluid mechanics and has experience in numerous mechanical design softwares.

Electrical

Predrag Stanić
Electrical Engineer

Predrag graduated in 2004 from the University of Belgrade, Faculty of Electrical Engineering.

He is a member of the Serbian Chamber of Engineers and experienced in a wide range of electronic communications, security and life safety systems designs from early concept stages throughout the construction documentation, review of project documentation, and supervision of constructions on site. He has extensive experience in Serbian, Russian, EMEA and Middle Asian markets. He joined Asmec in 2016.

Katarina Đorđević
Electrical Engineer

Katarina graduated in 2005 from the University of Belgrade, Faculty of Electrical Engineering.

She is a member of the Serbian Chamber of Engineers and experienced in a wide range of telecommunications and ELV designs from early concept stages throughout the construction documentation, review of project documentation, and supervision of constructions on site. She has extensive experience in Serbia, Russia, EMEA. She joined Asmec in February of 2020.

Dušan Mitrović
Electrical Engineer

Dušan graduated in 2016 from the University of Belgrade, Faculty of Electrical Engineering, and he has gained a title of Master of Electrical Engineering in 2017.

Before joining Asmec team in November 2017, he was working as a member of Contractor supervision team. He is experienced in wide range of LV services designs from early concept stages throughout the construction documentation, review of project documentation, and supervision of constructions on site. He has experience working with numerous relevant electrical design software programs such as Revit, AutoCAD, Matlab, Dialux, Ecodial and EPlan.

Slobodan Sarkanjac
Electrical Engineer

Slobodan graduated in 2007 from the University of Belgrade, Faculty of Electrical Engineering.

He is a member of the Serbian Chamber of Engineers. He is experienced in a wide range of electrical design from conceptual design through the detailed design documentation for construction works and review of project documentation. He worked in the field of design on buildings for various purposes, commercial, residential, hotel and tourist complexes, high buildings (h>60m), pharmaceutical, petrochemical and other industries, hospitals, religious buildings, sports and educational facilities. He worked fourteen years on projects in Serbia, Russia, Ukraine, Montenegro, Greece, Hungary, etc. He has experience working with numerous relevant electrical design software programs such as AutoCAD, Revit, Excel, Dialux, Ecodial and EPlan. He joined Asmec in June of 2022.

Aleksandar Ivanović
Electrical Engineer

Aleksandar graduated in 2015 from the University of Niš, Faculty of Electrical Engineering, and he has gained a title of Master of Electrical Engineering in 2017.

He has experience working in AutoCAD, Revit, DIALux.He joined Asmec in January of 2020.

Nikola Ćirić
Electrical Engineer

Nikola graduated in 2018 from the University of Niš, Faculty of Electrical Engineering, and he has gained a title of Master of Electrical Engineering in 2019.

Before joining the ASMEC team, he worked on the design of various types of buildings. He has experience working in AutoCAD, Revit, DIALux evo, DIALux.He joined ASMEC in May of 2021.

Tatijana Nikolić
Electrical Engineer

Tatijana is an electrical engineer with 20 years of design experience.

She workedas an electrical designer on major projects, both in the country and around the world such as Africa, Russia, Kazakhstan... She has experience in working with relevant software packages for electrical design, such as AutoCad, Revit, Dialux and Dialux evo. She joined Asmec in 2021.